The readme contains information, not included in the manuals or online help, on installing and using the current release of Version Manager. Additional information is available in the Knowledgebase.
The Version Manager readme consists of the following files:
This readme file is organized into distinct parts. Please read the parts that correspond to the Version Manager components that you are using.
Part 1: System Requirements
Part 2: Version Manager CLI, Desktop Client, File Server, and PCLI
Part 3: Version Manager IDE Client
Part 4: Version Manager Web Client
Part 5: Version Manager WebDAV Server
Part 6: Copyright/Disclaimers/Support
Part 1: System Requirements |
The 8.7.0 platform matrix is available online:
https://www.microfocus.com/documentation/pvcs-version-manager/8.7.0/
Large projects can exceed the memory allocated for Java in a variety of situations and with a variety of Version Manager interfaces. See "Out of Memory Error" or General Failure Operating on Large Projects in the Usage Cautions readme (usage_cautions.html) for information on setting the Java Heap Size for Version Manager clients.
The default heapsize for the server is 2048 MB.
Memory requirements for the server depend on how many users access the server at the same time, how many daemon processes are running (by default, 5 to 20 daemons are running), and the number of files in project databases that have been opened. Use the formula in the table below to calculate your memory needs.
| Server Systems | |||||
|---|---|---|---|---|---|
| Base | Concurrent Users | Daemons | Files | Total | |
| Formula | 1080 MB | + 6 MB per user | + 12 MB per daemon | + 1 KB per file | = ? |
| Example | 1080 MB | 6 x 100 = 600 MB | 12 x 20 = 240 MB | 100000 / 1024 = 97 MB | = 2017 MB |
NOTE: The example is for the case of 100 concurrent users, 20 daemon processes and 100000 files. It is included only to illustrate the use of the formula and is not intended as a recommendation.
To access Version Manager via the Internet Information Server (IIS), use IIS 8 or higher and see chapter "Configuring Microsoft IIS Web Servers" in the PVCS Version Manager Administrator’s Guide.
For additonal information, see KB doc S143266
If you are running the PVCS Version Manager Web Application Server and are performing an upgrade from VM 8.6.0, please take note of the Log On account that is used to run the service.
See In-place Upgrade from PVCS VM 8.6.0 or newer
To access Version Manager via the Apache HTTP Server, that server must include the following modules:
These modules typically are part of the standard Apache HTTP Server package. Module files end in the shared library extension for the Operating System. An example for Linux is /usr/lib64/httpd/modules/mod_proxy.so.
Installation of Version Manager on Linux, Solaris, HP-UX, and AIX uses a significant amount of space in the directory specified by $TMP (this data sticks around until you delete it), and temporarily places a significant amount of data in the VM_Install_Dir/VMverNum_inst directory (where verNum is the version number of the Version Manager release).
Linux and UNIX platforms may require additional modules or patches before they will run Version Manager. See KB doc S124060 for a list of Operating System patches and pre-installed package requirements for UNIX & Linux.
For information on the in-place upgrade process, see KB doc KM000028955.
Version Manager 64-bit requires the use of the 64-bit version of ActiveClient. When using the SCC IDE integration, Version Manager runs in 32-bit mode (as SCC itself is 32-bit only), requiring the use of the 32-bit components of ActivClient as well. These typically get installed automatically when installing the 64-bit version of ActivClient.
NOTES
In the file VM_Install_Dir\vm\common\pvcsprop\pvcs\vm\sso\card.config, the directive library64 should point to the 64-bit version of acpkcs211.dll and the directive library32 should point to the 32-bit version of this library (see KB doc S138646). If ActivClient is installed at the time Version Manager is installed, the paths to these libraries will automatically be added to card.config.
ActivClient 7 is supported as of version 7.0.2.408.
On Linux, ActiveClient 3.0 is supported.
Version Manager 8.7 requires APLS (Auto-Pass License Server) version 24.1 or newer.
If no APLS server is running at the time of installation, chose Evaluation Mode to enable a 30-day grace period to install APLS and migrate your licenses. Once APLS is installed, use ChangeLicenseServer.exe (Windows) or vmreg (Linux/UNIX) to point Version Manager to the new license server.
Version Manager integrates with SBM 10.1.x, SBM 11.x and SBM 12.x
As of PVCS VM 8.6.0, the Source Bridge integration for the Version Manager Desktop Client GUI and SCC IDE integrations can be installed from the Version Manager installer by selecting the component SourceBridge.
Do not use the legacy SourceBridge installer that ships with SBM. This is intended for Version Manager 8.5.3 and older.
Version Manager installs a private copy of Apache Tomcat in support of the Version Manager File Server, VM I-Net Web Client Server, WebDAV Server, and SSO authentication server. This installation of Tomcat is designed to work with Version Manager. Version Manager will not work with a generic Tomcat installation. If you have other Tomcat installations, you should ensure that they are not using the same ports (8005, 8009, 8080, 8090, 8443, and 8444).
Part 2: Version Manager CLI, Desktop Client, File Server, and PCLI |
Before attempting to install Version Manager, review the PVCS Version Manager Installation Guide for general information as well as specific scenarios that may apply to you.
If your LDAP server is configured to use Secure Sockets Layer (SSL) but there is not a certificate database in the VM_Install_Dir/vm/common/bin/OS directory or the database is missing the required SSL certificates, you will receive errors, such as:
"Failed to connect to LDAP server."
"You cannot access this project because your login account, UserName, is invalid ..."
See LDAP Connection/Authentication Fails in the Usage_Cautions.html readme file.
If you want to install to a server using a path name that contains any directory names longer than eight characters, you may first need to map a network drive to that location and use the drive mapping to install Version Manager. If you do not use a drive mapping, an error message may appear stating that the path to the setup executable is invalid.
To prevent errors when installing or working from a network installation of Version Manager, make sure network path names do not contain directory names longer than eight characters.
This is not a supported configuration.
When you install to the root of a UNC share, the installer indicates that zero space is required. The installer shows the required space correctly if you select a directory on the share. In either case, Version Manager will be correctly installed--provided you actually have enough disk space on the share.
To successfully install Version Manager, you need sufficient hard disk space on the drive containing Windows (~950 MB). If you delete temporary files created during installation, you will not need this amount of space once Version Manager is installed.
Part 3: Version Manager IDE Client |
The Linux version of the rich integration to Eclipse does not work correctly if the SBM server is using NTLM authentication. One can still submit issues, but no issues are visible via the Active Issues or IDE Folder view.
To avoid this issue, do not to use NTLM authentication when the integration clients are on a non-windows platform. If you must use NTLM, set up an external virtual directory on the SBM/IIS server.
To use the SSO login source, the JDK used by Eclipse RIDE needs to be Java 8-based. Upgrade the JDK as needed.
Before attempting to install Version Manager, review the PVCS Version Manager Installation Guide for general information as well as specific scenarios that may apply to you.
To use a new version of the Version Manager IDE client, you must uninstall any previous version of the IDE client on your system before installing the new version. If you wish to use an older version of the IDE client once the new version is installed, you must uninstall it before installing the older software.
If you currently use TrackerLink with SCC IDEs and wish to use Source Bridge (SBM) instead, change your SCC provider from TrackerLink to Version Manager before installing Source Bridge. Source Bridge will then set itself as the SCC provider and pass SCC information on to Version Manager.
To set the SCC provider, launch the Version Manager SCC Admin. For details, see the PVCS Version Manager IDE Client Implementation Guide.
If you install Source Bridge while TrackerLink is still set as the SCC provider, Source Bridge will try to use TrackerLink as the SCC provider. Source control will not work.
To correct this, set the SCC provider in the System Settings tab of the Source Bridge dialog box. For details, see the "About Setting Up Source Bridge" section of the PVCS Version Manager Administrator's Guide.
Workaround: Reboot to update your system's path information.
Part 4: Version Manager Web Client |
Before attempting to install Version Manager, review the PVCS Version Manager Installation Guide for general information as well as specific scenarios that may apply to you.
This is not a supported configuration.
Once installation of the Version Manager Web Client is complete, you can delete the PVCS Version Manager MSI file if disk space is a consideration. The file is typically located in a folder named "C:\Windows\Downloaded Installations".
After you delete the file, you can still use Add/Remove Programs to modify or remove Version Manager.
Part 5: Version Manager WebDAV Server |
Before attempting to install Version Manager, review the PVCS Version Manager Installation Guide for general information as well as specific scenarios that may apply to you.
Part 6: Copyright/Disclaimers/Support |
To obtain product support, log into portal.microfocus.com.
Micro Focus recognizes that virtualization technology provides significant utility and value to our customers. As such, Micro Focus conducts functional testing and certifies our products using virtualization technology in addition to native environments. While Micro Focus expects that our products will function properly when running on supported platforms in a virtualized environment as well as a native environment, there may be functional and performance limitations. Micro Focus will not require that customers recreate and troubleshoot every issue in a non-virtualized environment, however there may be circumstances in which such action may be required. Micro Focus will only make this request when there is reason to believe that the virtualized environment is a contributing factor to the issue. If the issue cannot be reproduced in a supported non-virtualized environment, customers will need to refer their issues to their virtualization vendor.
The license information for Third Party components used by and distributed with PVCS Version Manager can be found in the PVCS installation directory.
End Readme
Copyright © 2003–2024 Micro Focus or one of its affiliates.